Fiberglass Blown-in Insulation

Image Source: Unsplash

‍

When you think of insulation, you probably picture the fluffy kind that comes in a box and you can blow into your walls. But there is another type of insulation that is becoming more popular among homeowners — fiberglass blown-in insulation. This kind of insulation is different from what you’re used to seeing because it does not come in a box or in little bags. It’s actually a mixture of small glass fibers and special additives that are blown into walls and other cavities with an air-tight blower. Fiberglass blown-in insulation may not be as fluffy as the kind we’re all familiar with, but it does have its advantages. Let’s take a look at why this is becoming an increasingly common type of home insulation, how it differs from traditional insulations, and some tips on how to install it properly if you’re thinking about doing so in your own home.

What is Fiberglass Blown-in Insulation?

Fiberglass blown-in insulation is exactly what it sounds like — insulation that is blown into walls using small glass fibers. It is similar to fiberglass batts, in that they both use glass fibers in their insulation. But since it’s blown into the wall, it doesn’t need to be attached to a frame like traditional insulation does. Traditional batt insulation is made from small pieces of fiberglass that are woven together to form a large piece of cloth-like material. Batt insulation is attached to the wall with staples or adhesive. Fiberglass blown-in insulation is different from this because it doesn’t need to be attached to a wall. Once it’s blown in, it stays there — in fact, it expands and fills in any gaps that are in the wall. This means that it doesn’t need to be attached, so there’s no messy tacking or hammering involved in its installation.

Why Install Fiberglass Blown-in Insulation?

There are many reasons why homeowners are switching to blown-in insulation, but here are a few of the most common. Blown-in insulation is odor-free. Traditional insulation, on the other hand, can have an unpleasant smell because it is treated with fire retardants, which smell bad. Blown-in insulation doesn’t need to be attached to a frame. This makes it much quicker and easier to install than traditional insulation, which needs to be framed and attached to the wall. Blown-in insulation is super energy-efficient. Traditional insulation is also energy efficient, but blown-in insulation is even better at keeping the cold out in the winter and the heat in in the summer. Blown-in insulation is less expensive than traditional insulation. It’s also easy to install and doesn’t require a lot of know-how, so even inexperienced DIYers can do it. This type of insulation is also long-lasting, so you won’t have to replace it for years. Blown-in fiberglass insulation is eco-friendly. It’s made from recycled materials, and it doesn’t need to be disposed of when you’re ready to replace it. This means you can reuse it in the future if you ever decide to redo your home’s insulation.

How to Install Fiberglass Blown-in Insulation?

Installing blown-in insulation is no easy task — it’s a messy, time-consuming project that can be quite difficult if you don’t know what you’re doing. If you’re thinking about doing it yourself, make sure that you follow the instruction manual carefully. If you’re hiring a contractor, make sure they’re experienced in installing blown-in insulation. If you don’t know how to install blown-in insulation or aren’t sure if you’re doing it right, here are a few tips to help you out. Blown-in insulation needs to be installed at the right temperature, which is between 60 and 80 degrees Fahrenheit. If it’s too hot or cold, the insulation won’t be able to expand properly, which can result in it not being blown into the wall properly. Make sure you don’t do the installation when it’s too hot or cold. Blown-in insulation can cause health problems if it isn’t installed properly. Before you hire a contractor or attempt to do it yourself, make sure that you know what you’re getting yourself into. Blown-in insulation can be pretty messy. Make sure you’re prepared to clean up after yourself, or get someone to help you who isn’t afraid of a little bit of mess.

Pros of Installing Fiberglass Blown-in Insulation

As we’ve already discussed, there are many advantages to installing blown-in insulation. Here are a few of the most notable ones. Blown-in insulation is eco-friendly. Like we mentioned above, blown-in insulation is made from recycled materials, so it’s a much more eco-friendly way to insulate your walls than using traditional insulation. Blown-in insulation is easier to install than traditional insulation. There are lots of advantages to installing blown-in insulation, and one of the biggest ones is that it’s much easier to install than traditional insulation. Blown-in insulation is less expensive than traditional insulation. If you’re looking to save money on home insulation, blown-in insulation is a much cheaper option than traditional insulation. Blown-in insulation is good for homes with allergies. If you or someone in your home has allergies, blown-in insulation is a great option for them because it’s treated with low-emission chemicals, and it doesn’t contain any formaldehyde. Blown-in insulation is good for all types of homes. It’s an excellent insulation for all types of homes, no matter what kind they are. Blown-in insulation is great for installing in attics. If you want to install insulation in your attic, blown-in insulation is the best option.

Cons of Installing Fiberglass Blown-in Insulation

There are some disadvantages to installing blown-in insulation, but they aren’t anything that can’t be overcome. Blown-in insulation isn’t great for areas where there aren’t any walls. If you want to use it in a room without any walls — like a basement — you’ll need to frame the insulation and attach it to a wall. Blown-in insulation is messy. This one is pretty obvious, but it’s something you definitely need to be prepared for if you plan on installing it yourself. Blown-in insulation takes a long time to install. It’s not a project you can do in one day — it takes several days to install blown-in insulation, and it’s a lot of work. Blown-in insulation is loud. It’s not a project you can do on a Saturday afternoon while watching football — you’ll have to turn off the TV and wear ear protection because it’s so loud. Blown-in insulation takes special tools. If you’re doing it yourself, you’ll need to invest in some special equipment. Blown-in insulation isn’t as easy to install as some people think. It requires some knowledge, and you can’t just blow it into the wall willy-nilly — you have to know what you’re doing. Blown-in insulation can cause damage if you don’t install it properly. If it’s not installed correctly, it can end up causing more damage than good in your walls.

Final Words: Should You Install It?

Blown-in insulation is a great choice for any home, but it’s especially good for houses that are located in colder climates or are energy inefficient. If you’re thinking about installing blown-in insulation, make sure you follow the instructions carefully. Don’t rush the process and make sure that you install it correctly — you don’t want to end up doing more damage than good in your walls. If you’re thinking about installing blown-in insulation, don’t wait any longer. Get in touch with your contractor today, and get your home properly insulated for the cold weather ahead. END